Only registered users can download the product Data Sheets (in product pages or products lists). Please login or register to access this informations. If you need the Security Sheets please contact us.
AMINOL SUPER H
Is reccomanded to boost the cure speed in polyurethane coatings. Side effect is reduced pot life.
Type
Additive% of use
0,1 - 0,3Effect
Curing enhancerDesigned for
Polyurethane 2K SystemsApplication methods
SprayFTALON 27 / 70 ABT
Glossy polyurethane topcoats with high body, excellent surface hardness and good polishability; coated surfaces may be stacked after 20 hrs.
Solids content %
70 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
1700 - 2300Acid value on solids - mg KOH/g
10 - 18% OH on solids
5,3 ± 0,2Max colour - Gardner scale
Note
High glossFTALON 29 / 50X
Very fast drying matt finish topcoats with excellent surface hardness. If used alone take care when selecting the combination of isocyanates to be used.
Solids content %
50 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
3000 - 4000Acid value on solids - mg KOH/g
14 - 20% OH on solids
3,3 ± 0,2Max colour - Gardner scale
5Note
Fast dryingFTALON 29 / 60 ABT
Very fast drying matt finish topcoats with excellent surface hardness. If used alone take care when selecting the combination of isocyanates to be used.
Solids content %
60 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
2500 - 3100Acid value on solids - mg KOH/g
14 - 20% OH on solids
3,3 ± 0,2Max colour - Gardner scale
5Note
MultipurposeFTALON 33 / 60 X
Multipurpose resin designed for preparation of any polyurethane coating for wood. Outstanding solvent and air release even at high temperature and thick layers. Suitable for acid curing and nitro coatings.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
5800 - 7200Acid value on solids - mg KOH/g
11 - 16% OH on solids
3,8 ± 0,2Max colour - Gardner scale
2,5FTALON 41 / 60X
Excellent for open pore basecoats. Good transparency and long pot-life. Broad range of applications in wood coatings.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
3000 - 4000Acid value on solids - mg KOH/g
13 - 20% OH on solids
4,5 ± 0,2Max colour - Gardner scale
4FTALON 42 / 60 X
Saturated Polyester with excellent mechanical properties, hardness and flexibility. Suitable for matt and glossy basecoats and topcoats for wood and metal. It can be used to improve sanding, mechanical resistances and hardness of fragile resins.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
3500 - 4500Acid value on solids - mg KOH/g
17 - 23% OH on solids
4,5 ± 0,2Max colour - Gardner scale
4Note
Wetting propertiesFTALON 42 / 70 ABT
Saturated Polyester with excellent mechanical properties, hardness and flexibility. Suitable for matt and glossy basecoats and topcoats for wood
and metal. It can be used to improve sanding, mechanical resistances and hardness of fragile resins.
Solids content %
70 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
4800 - 6200Acid value on solids - mg KOH/g
17 - 23% OH on solids
4,5 ± 0,2Max colour - Gardner scale
5Note
Wetting propertiesFTALON 43 / 60X
Fast drying basecoats. Excellent sanding and wood grain filling. A classic blending resin used to enhance the performance of nitrocellulose/polyurethane products.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
1800 - 2400Acid value on solids - mg KOH/g
14 - 20% OH on solids
4,7 ± 0,2Max colour - Gardner scale
4Note
High flexibilityFTALON 43 / 70 ABT
Fast drying basecoats. Excellent sanding and wood grain filling. A classic blending resin used to enhance the performance of nitrocellulose/polyurethane products.
Solids content %
70 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
3500 - 4500Acid value on solids - mg KOH/g
14 - 20% OH on solids
4,7 ± 0,2Max colour - Gardner scale
4Note
High flexibilityFTALON 45 / 75 X
Multipurpose resin. Excellent pot-life and sanding. High solids content. Ideal for the formulation of nitrocellulose /polyurethane products
Solids content %
75 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
4700 - 5700Acid value on solids - mg KOH/g
13 - 20% OH on solids
3,3 ± 0,2Max colour - Gardner scale
4FTALON 45 / 80 ABT
Multipurpose resin. Excellent pot-life and sanding. High solids content. Ideal for the formulation of nitrocellulose /polyurethane products.
Solids content %
80 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
3000 - 4000Acid value on solids - mg KOH/g
13 - 20% OH on solids
3,3 ± 0,2Max colour - Gardner scale
4Note
High solidFTALON 60 / 60 X
Plasticising resin for two pack systems. Excellente wetting of pigments and substates.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
1700 - 2300Acid value on solids - mg KOH/g
11 - 16% OH on solids
4,5 ± 0,2Max colour - Gardner scale
4Note
High flexibilityFTALON 692 / 60 X
High Viscosity resin for sanding sealer, glossy or matt topcoats for wood. For fast drying time PU systems.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
30000 - 34000Acid value on solids - mg KOH/g
14 - 20% OH on solids
3,3 ± 0,2Max colour - Gardner scale
5Note
Fast dryingFTALON 9075 / 75 ABT
Resin for polyurethane enamels for wood and metal. Suitable for non yellowing stoving enamels. Excellent compatibility with nitrocellulose and isocyanates. Very good outdoor resistance. Suitable for tinting pastes.
Solids content %
75 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
3500 - 5500Acid value on solids - mg KOH/g
12 Max% OH on solids
4,5 ± 0,2Max colour - Gardner scale
FTALON 9075 / 75 X
Resin for polyurethane enamels for wood and metal. Suitable for non yellowing stoving enamels. Excellent compatibility with nitrocellulose and isocyanates. Very good outdoor resistance. Suitable for tinting pastes.
Solids content %
75 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
6000 - 10000Acid value on solids - mg KOH/g
12 Max% OH on solids
4,5 ± 0,2Max colour - Gardner scale
FTALON TAC / 60 X
Top quality polyester for high solid varnish and enamels. Enabling to replace in formulation the hydroxylated acrylic resins with an excellent cost/performance balance.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
2500 - 3100Acid value on solids - mg KOH/g
6 - 10% OH on solids
4,5 ± 0,2Max colour - Gardner scale
Note
Compatible with acrylicsFTALON TAC / 75 ABT
Top quality polyester for high solid varnish and enamels. Enabling to replace in formulation the hydroxylated acrylic resins with an excellent cost/performance balance.
Solids content %
75 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
5800 - 7200Acid value on solids - mg KOH/g
6 - 10% OH on solids
4,5 ± 0,2Max colour - Gardner scale
Note
Compatible with acrylicsFTALON TN / 65 X
Resin for pure polyurethane or blended acrylic/polyurethane enamels for wood and metal primer and topcoats. Represents a perfect balance between technical performance, costs and easy use. It can be used also for marine applications.
Solids content %
65 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
4500 - 5500Acid value on solids - mg KOH/g
20 - 27% OH on solids
4,7 ± 0,2Max colour - Gardner scale
3Note
Metal adhesionITALESTER 011
Two-pack polyurethane topcoats for wood and metal, with very high hardness, high flexibility and brushability. Good shock and chemical resistance. Excellent for wood floorings.
Solids content %
100Brookfield Viscosity at 25°C - mPas
300 - 500 (70% PMA)Acid value on solids - mg KOH/g
3 Max% OH on solids
6,5 ± 0,2Max colour - Gardner scale
250 AphaNote
Flexibility and durabilityITALESTER 308
Two-pack polyurethane topcoats for wood with very high hardness, good flexibility and adhesion. Excellent chemical resistance. Excellent for wood floorings.
Solids content %
80 ± 2Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
4000 - 6000Acid value on solids - mg KOH/g
5 Max% OH on solids
8,9 ± 0,2Max colour - Gardner scale
2Note
High durabilityITALESTER 312
Two-pack polyurethane topcoats for wood. Very good flexibility and excellent adhesion. Good chemical resistance and outdoor durability. Excellent for wood floorings.
Solids content %
100Brookfield Viscosity at 25°C - mPas
15000 - 30000Acid value on solids - mg KOH/g
5 Max% OH on solids
4,5 ± 0,2Max colour - Gardner scale
2ITAMIN U 32
Urea/Formaldeheide resin for stoving and acid curing coatings with low level of free formaldehyde. Medium high reactivity.
Type
UFSolids content %
68 ± 2Solvent(s)
IsobutanolBrookfield Viscosity at 25°C - mPas
2500 - 6000Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,5Max colour - Gardner scale
MITTEL 6703
Multipurpose additive used to prevent the formation of air bubbles.
Type
Additive% of use
0,4 - 1,5Effect
Anti bubbleDesigned for
Polyurethane Top and BasecoatsApplication methods
Spray - CurtainMITTEL 6713
Generates a synergistic reaction when blended with Mittel 6703.
Type
Additive% of use
0,4 - 1,0Effect
Anti bubble / LevellingDesigned for
Polyurethane TopcoatsApplication methods
Spray - CurtainMITTEL 6732
Blended with Mittel 6737 to improve the hardness of matt finish coatings for curtain coating application.
Type
Additive% of use
0,3 - 1,5Effect
Improve surface hardnessDesigned for
Matt Finish PolyurethaneApplication methods
CurtainMITTEL 6737
Excellent performance in bubble prevention and flow control. The product may be overcoated without sanding.
Type
Additive% of use
0,5 - 2,0Effect
Levelling / SlipDesigned for
Polyurethane TopcoatsApplication methods
Spray - CurtainMITTEL 6745
Anti-cratering effect and flow properties enhancer. Mainly used in unsaturated polyester based coatingas.
Type
Additive% of use
0,5 - 1,0Effect
Anti pinholing / Anti crateringDesigned for
Direct gloss PolyesterApplication methods
SprayMITTEL 6755
Excellent enhancer of the appearance of polyurethane coatings. Ensure the additive is throughly dispersed.
Type
Additive% of use
0,4 - 0,8Effect
Anti - bubble / Hardening Anti-gassing / Flow control / Solvent releaseDesigned for
Polyurethane TopcoatsApplication methods
CurtainMITTEL 6763
High efficiency in removing foam from polyester basecoats containing zinc stearate.
Type
Additive% of use
0,5 - 2,0Effect
Anti bubbleDesigned for
UV Curables Thixotropic PolyesterApplication methods
Spray - Curtain - RollerMITTEL 6772
Is reccomanded to boost the cure speed in polyurethane coatings.
Type
Additive% of use
0,05 - 2,0Effect
Curing enhancerDesigned for
Polyurethane 2K SystemsApplication methods
SprayMITTEL 6818
Specifically designed for high solid and low VOC PU coatings.
Type
Additive% of use
1 - 4Effect
Defoamer / LevellingDesigned for
PU and Air drying enamelsApplication methods
Spray - Roller - BrushMITTEL 6821
Organo metallic accelerator which does not significantly alter the pot-life of polyurethanes systems.
Type
Additive% of use
0,2 - 2Effect
Curing enhancerDesigned for
Polyurethane systemsApplication methods
SprayRASTAL HARD PER UV
Filler paste designed for anti-scratch coatings in UV systems.
Type
AuxiliariesSolids content %
100% of use
10 - 20Effect
AntiscratchDesigned for
UV curable topcoatApplication methods
Spray - RollerRASTAL SCR
Filler dispersion designed to increase the surface hardness in solvent systems.
Type
AuxiliariesSolids content %
80 ± 2Solvent(s)
Butyl Acetate% of use
10 - 20Effect
AntiscratchDesigned for
2K PU systemsApplication methods
Spray - Roller - BrushSINTAL 204 / 60 X
General porpouse resin for polyurethane and nitrocellulose wood coatings particularly designed for PU matt topcoats.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
2200 - 2800Acid value on solids - mg KOH/g
4 - 10% OH on solids
4,2 ± 0,2Max colour - Gardner scale
5Oil length %
40Oil - fatty acids
Castor oil and vegetable oilNote
Deep matt systemSINTAL A 40 / 75 ABT
High solid resin for nitrocellulose wood coating with good filling power.
Solids content %
75 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
6000 - 8000Acid value on solids - mg KOH/g
9 - 15% OH on solids
3Max colour - Gardner scale
6Oil length %
36Oil - fatty acids
TalloilNote
MultipurposeSINTAL F 184 / 70 X
Non-yellowing alkyd resin, suitable for high quality NC, AC, PU and stoving coatings. Top coats for furniture, car refinishing, general industry and OPV cans.
Solids content %
70 ± 2Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
5000 - 8000Acid value on solids - mg KOH/g
6 - 12% OH on solids
2,8 ± 0,2Max colour - Gardner scale
2Oil length %
28Oil - fatty acids
CoconutNote
MultipurposeSINTAL GS 84
Non yellowing short oil alkyd resin, suitable for 2K-PU coatings, for car and industrial refinishing OPV cans and for wood applications.
Solids content %
70 ± 2Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
4500 - 6500Acid value on solids - mg KOH/g
5 - 10% OH on solids
3Max colour - Gardner scale
50 aphaOil length %
28Oil - fatty acids
Sinthetic fatty acidNote
Compatible with acrylicsSINTAL R 567 / 60 X
Short-oil alkyd resin, for 2K PU fast drying long pot-life and ecellent flow and adhesion. For wood and metal.
Solids content %
60 ± 2Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
4000 - 5000Acid value on solids - mg KOH/g
5 - 15% OH on solids
4,8 ± 0,2Max colour - Gardner scale
7Oil length %
43Oil - fatty acids
Castor oil and vegetable oilSINTAL S 010 / 60 X
Fast drying enamels with outstanding gloss retention.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
3000 - 4000Acid value on solids - mg KOH/g
11 - 16Max colour - Gardner scale
5Oil length %
29Oil - fatty acids
SoyaNote
Fast dryingSINTAL S 09 / 60 X
Very fast drying glossy enamels resistant to overcoating.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
3700 - 4700Acid value on solids - mg KOH/g
11 - 16Max colour - Gardner scale
5Oil length %
29Oil - fatty acids
SoyaNote
Fast dryingSINTAL S 340 / 60 X
Nitrocellulose, air drying enamels and amino stoving enamels. It combines excellent mechanical properties, good dust and touch free times.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
10000 - 12000Acid value on solids - mg KOH/g
5 - 12% OH on solids
4,3Max colour - Gardner scale
6Oil length %
35Oil - fatty acids
SoyaNote
MultipurposeSINTAL T 300 / 60 X
Nitrocellulosa coatings, fast drying and stoving enamels in combination with amino resins.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
6300 - 7700Acid value on solids - mg KOH/g
12 - 18% OH on solids
4,2 ± 0,2Max colour - Gardner scale
6Oil length %
35Oil - fatty acids
TalloilNote
Fast dryingSYNCRYL 406 / 60 TPGDA
Reactive resin specially designed for UV wood basecoats with excellent cost/performance balance. Suitable for EB coatings.
Chemical Nature
Unsaturated PolyesterReactive thinner
TPGDAFunctionality
3Solids content %
60Brookfield Viscosity at 25°C - mPas
10000 - 12000Acid value on solids - mg KOH/g
16 - 21Max colour - Gardner scale
3SYNCRYL 413 / 60 DPGDA
Reactive resin specially designed for UV sealers and top coats with good wetting properties and excellent cost/performance balance.
Chemical Nature
Unsaturated Acrylated PolyesterReactive thinner
DPGDAFunctionality
3Solids content %
60Brookfield Viscosity at 25°C - mPas
3500 - 4500Acid value on solids - mg KOH/g
15 - 20Max colour - Gardner scale
1SYNCRYL 435
Resin for UV/PU top-coat dual-cure solvent borne varnish and enamels, fast drying and not yellowing.
Chemical Nature
Acrylated Acrylic OligomerReactive thinner
Xylene / Butyl Acetate / TMPTAFunctionality
3Solids content %
76Brookfield Viscosity at 25°C - mPas
700 - 900Acid value on solids - mg KOH/g
3 - 7Max colour - Gardner scale
1Note
Dual cureSYNCRYL 436
For non yellowing dual cure wood coating. For open-pore matt, clear and pigmented.
Chemical Nature
Acrylated Acrylic OligomerReactive thinner
Xylene / Butyl Acetate / TMPTEOTAFunctionality
3Solids content %
80Brookfield Viscosity at 25°C - mPas
300 - 450Acid value on solids - mg KOH/g
3 - 7Max colour - Gardner scale
1Note
Dual cureSYNCRYL 438
Version aromatic free of Syncryl 436.
Chemical Nature
Acrylated Acrylic OligomerReactive thinner
TMPEOTA / Butyl AcetateFunctionality
3Solids content %
80Brookfield Viscosity at 25°C - mPas
300 - 400Acid value on solids - mg KOH/g
5 MaxMax colour - Gardner scale
1Note
Dual cureSYNCRYL 705 / 60 DPGDA
Unsaturated polyester styrene free for wood top-coat UV system.
Chemical Nature
Unsaturated PolyesterReactive thinner
DPGDAFunctionality
2Solids content %
60Brookfield Viscosity at 25°C - mPas
2500 - 3500Acid value on solids - mg KOH/g
15 MaxMax colour - Gardner scale
≤ 150 AphaSYNTEVEN 105
Pigmented pastes styrene free, general purpose.
Solids content %
100Solvent(s)
Solvent freeBrookfield Viscosity at 25°C - mPas
600 - 700Acid value on solids - mg KOH/g
18 - 22Note
For tinting paste, Styrene freeSYNTEVEN 107
Pigmented pastes styrene free,high pigment wettability.
Solids content %
100Solvent(s)
Solvent freeBrookfield Viscosity at 25°C - mPas
250 - 350Acid value on solids - mg KOH/g
15 - 25Colour
≤ 150 AphaNote
For tinting paste, Styrene freeSYNTEVEN 462
Unpromoted resin to improve the flexibility in UP systems.
Solids content %
65,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
8 - 15Iodine colour value
≤ 3 IodineApplication methods
Knifing PuttySYNTEVEN 610
Direct glossy unsaturated polyester resin used to formulate conventional curing coatings (wax-free) clear or pigmented for wood.
Solids content %
75 ± 1Solvent(s)
StyreneBrookfield Viscosity at 25°C - mPas
2400 - 2700Acid value on solids - mg KOH/g
15 - 25Iodine colour value
≤ 2 IodineDesigned for
WoodNote
Sanding sealerSYNTEVEN 701
To formulate clear and pigmented, coatings for wood and furniture and spray filler for automotive refinishing. High gloss, good reactivity and hardness. Rigid.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
12 - 18Iodine colour value
≤ 100 AphaApplication methods
Spraing PuttySYNTEVEN 703
Conventional curing, for primer and top-coat. Good flow and hardness, easy to sand.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
≤ 29Iodine colour value
Max 2 IodineSYNTEVEN 704
For clear and pigmented top coat non yellowing redox system.
Solids content %
80 ± 1Solvent(s)
Butyl AcetateAcid value on solids - mg KOH/g
14 - 22Iodine colour value
≤ 100 AphaNote
Styrene freeSYNTEVEN 713
For top-coat redox system. Monomer free.
Solids content %
100Solvent(s)
Solvent freeAcid value on solids - mg KOH/g
Ca 22Iodine colour value
Max 2 IodineNote
Styrene freeSYNTEVEN 714
Conventional curing, for primer and top-coat. Good flow and hardness, more reactive than Synteven 703.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
≤ 20Iodine colour value
≤ 130 AphaSYNTEVEN 720
For top- coat redox and UV system, with a very good flexibility.
Solids content %
70 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
15 - 20Iodine colour value
≤ 150 AphaDesigned for
WoodApplication methods
Spraing PuttySYNTEVEN 722
Conventional curing, for primer and top-coat. Good flow and hardness, more reactive than Synteven 714.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
14 - 20Iodine colour value
≤ 130 AphaSYNTEVEN 725
Special grade for wax primer redox and UV system. Fast reactivity and hardness.
Solids content %
68 ± 1Solvent(s)
StyreneBrookfield Viscosity at 25°C - mPas
1400 - 1600Acid value on solids - mg KOH/g
≤ 30Iodine colour value
≤ 150 AphaSYNTEVEN 728AE
For clear and pigmented top coat non yellowing redox and UV system, good flexibility and high gloss.
Solids content %
80 ± 1Solvent(s)
Ethyl AcetateBrookfield Viscosity at 25°C - mPas
1700 - 2000Acid value on solids - mg KOH/g
≤ 20Iodine colour value
≤ 150 AphaNote
Styrene freeSYNTEVEN 729AE
For top-coat redox and UV system. Very fast curing.
Solids content %
80 ± 1Solvent(s)
Ethyl AcetateBrookfield Viscosity at 25°C - mPas
4000 - 5000Acid value on solids - mg KOH/g
≤ 20Iodine colour value
≤ 150 AphaNote
Styrene freeSYNTEVEN G 650 / 75 HPMA
Highly reactive diret gloss polyester for UV and REDOX systems, styrene-free.
Solids content %
75 ± 1Solvent(s)
HPMAAcid value on solids - mg KOH/g
12 - 22Iodine colour value
Max 2 IodineDesigned for
WoodNote
Styrene freeSYNTEVEN P 3 GA - 707
Fast curing and good hardness also for clear or pigmented top coat redox and UV system.
Solids content %
68 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
14 - 20Iodine colour value
Max 1 IodineSYNTEVEN PL 604
For top-coat redox and UV system. Very fast and high compatibility in styrene.
Solids content %
69,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 100 AphaSYNTEVEN PS 07 - 731
Special grade for wax primer redox and UV system. Fast reactivity and hardness.
Solids content %
68 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
25 - 32Iodine colour value
Max 1 IodineSYNTEVEN PS 46 GA/AC
For top-coat redox and UV system. Very fast curing.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
16 - 22Iodine colour value
Max 2 IodineSYNTEVEN UL 959 GA - 700
For high gloss top-coat with "wet look" effect. Reactive and hard polymer.
Solids content %
75 ± 1Solvent(s)
StyreneBrookfield Viscosity at 25°C - mPas
1200 - 1600Acid value on solids - mg KOH/g
15 - 21Iodine colour value
≤ 150 AphaSYNTEVEN UL 966 GA - 626
For UV system. Direct gloss, for very fast sanding sealer.
Solids content %
75 ± 1Solvent(s)
StyreneBrookfield Viscosity at 25°C - mPas
3500 - 4000Acid value on solids - mg KOH/g
20 - 30Iodine colour value
Max 2 IodineURONAL B 55 / 50 ABT
Very reactive, flexible, aromatic polymer for polyurethane wood coatings with long pot-life.
Chemical Nature
AromaticSolids content %
50Solvent(s)
Butyl Acetate% NCO
7,3 - 8,0Brookfield Viscosity at 25°C - mPas
300 - 400URONAL KFL
Similar to KL, but more flexible, longer pot-life and more compatible with nitrocellulose.
Chemical Nature
Aliphatic AromaticSolids content %
60Solvent(s)
Butyl Acetate% NCO
10,0 - 10,6Brookfield Viscosity at 25°C - mPas
280 - 360Max colour - Gardner scale
URONAL KL / ABT
Mixed aliphatic/aromatic polymer for non yellowing fast drying polyurethane coatings.
Chemical Nature
Aliphatic AromaticSolids content %
60Solvent(s)
Butyl Acetate% NCO
10,2 - 10,8Brookfield Viscosity at 25°C - mPas
400 - 500Max colour - Gardner scale
URONAL NL
Aliphatic polyisocyanate for non yellowing polyurethane coatings, high gloss retention.
Chemical Nature
AliphaticSolids content %
75Solvent(s)
Xylene / PMA% NCO
16,0 - 17,0Brookfield Viscosity at 25°C - mPas
50 - 300Max colour - Gardner scale
Note
BiuretURONAL NL 100
Aliphatic polyisocyanate for non yellowing polyurethane coatings, high gloss retention. Solvent free.
Chemical Nature
AliphaticSolids content %
100% NCO
21,5 - 22,5Brookfield Viscosity at 25°C - mPas
2000 - 2800Max colour - Gardner scale
Note
TrimerURONAL NL 90
Aliphatic polyisocyanate for non yellowing polyurethane coatings, high gloss retention and high solid.
Chemical Nature
AliphaticSolids content %
90Solvent(s)
Butyl Acetate% NCO
19,1 - 20,5Brookfield Viscosity at 25°C - mPas
400 - 600Max colour - Gardner scale
Note
TrimerURONAL P 75 New Standard
Aromatic adduct for glossy polyurethane coatings or to use as plasticising partner of more brittle isocyanates.
Chemical Nature
AromaticSolids content %
75Solvent(s)
Ethyl Acetate% NCO
12,5 - 13,5Brookfield Viscosity at 25°C - mPas
1000 - 1500Max colour - Gardner scale
Note
AdductURONAL RA 50 / 50 ABT
Aromatic polymer for very fast reactive polyurethane wood coatings which are easy to sand. It can be plasticised with Uronal P75 NS.
Chemical Nature
AromaticSolids content %
50Solvent(s)
Butyl Acetate% NCO
7,5 - 8,5Brookfield Viscosity at 25°C - mPas
850 - 1050URONAL RA 55 / 50 ABT
More flexible and longer pot-life, if compared to Uronal RA 50 / 50 ABT.
Chemical Nature
AromaticSolids content %
50Solvent(s)
Butyl Acetate% NCO
7,0 - 8,0Brookfield Viscosity at 25°C - mPas
800 - 1000URONAL RB 60
Aromatic adduct to be used for sealers, matt and glossy topcoats as sole hardner.
Chemical Nature
AromaticSolids content %
60Solvent(s)
Mix of acetates% NCO
9,2 - 9,8Brookfield Viscosity at 25°C - mPas
1150 - 1350Max colour - Gardner scale
VERTOXAN VSE NUOVO STANDARD
Thixotropic paste (Benton based) for 2K PU, NC, AC and stoving enamels.