Only registered users can download the product Data Sheets (in product pages or products lists). Please login or register to access this informations. If you need the Security Sheets please contact us.
SYNTEVEN 105
Pigmented pastes styrene free, general purpose.
Solids content %
100Solvent(s)
Solvent freeBrookfield Viscosity at 25°C - mPas
600 - 700Acid value on solids - mg KOH/g
18 - 22Note
For tinting paste, Styrene freeSYNTEVEN 107
Pigmented pastes styrene free,high pigment wettability.
Solids content %
100Solvent(s)
Solvent freeBrookfield Viscosity at 25°C - mPas
250 - 350Acid value on solids - mg KOH/g
15 - 25Colour
≤ 150 AphaNote
For tinting paste, Styrene freeSYNTEVEN 404
Ideal sole binder for wide range of fillers and putties. Very easy to sand, good adhesion properties and high stability. Medium flexbility.
Solids content %
62,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 15 IodineSYNTEVEN 421
Basic binder in the manufactoring of several kinds of mastics. Fast curing and good color retentions after polymerisation. Semi rigid.
Solids content %
70,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
20 - 30Iodine colour value
≤ 10 IodineDesigned for
MarbleNote
Chemical anchoringSYNTEVEN 422
Full binder for the highly filled knifing fillers and stoppers for marble and stone, fast curing. Rigid.
Solids content %
70 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
7 - 10,5Iodine colour value
≤ 10 IodineDesigned for
MarbleSYNTEVEN 430
Binder for adhesive, highly filled knifing fillers and putties for car, marble and stone. Fast curing, Very hard and easy to send. Rigid.
Solids content %
64 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
20 - 30Iodine colour value
≤ 15 IodineDesigned for
MarbleApplication methods
Knifing PuttySYNTEVEN 432
Highly filled knifing fillers and putties for car repair. Good adhesion properties to various kinds of substrates. Medium flexibility.
Solids content %
61 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
15 - 25Iodine colour value
≤ 10 IodineApplication methods
Knifing PuttySYNTEVEN 440
Ideal sole binder for wide range of fillers and putties. Very easy to sand, good adhesion properties and high stability. Medium flexbility.
Solids content %
62,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 15 IodineApplication methods
Knifing PuttySYNTEVEN 443
To improve the flexibility in UP systems. Medium reactivity, overbaking resistances to high temperature. High flexibility.
Solids content %
65 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
≤ 15Iodine colour value
≤ 15 IodineApplication methods
Knifing PuttySYNTEVEN 445
To improve the flexibility in UP systems. In combination with same other Synteven grade to improve the flexibility. High flexibility.
Solids content %
67 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 10 IodineApplication methods
Knifing PuttySYNTEVEN 447
To improve the flexibility in UP systems. Medium reactivity, overbaking resistances to high temperature. High flexibility.
Solids content %
65 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 10 IodineApplication methods
Knifing PuttySYNTEVEN 454
Special grade. Ideal sole binder for wide range of fillers and putties for light putty on galvanized steel.
Solids content %
64,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
≤ 20Application methods
Knifing PuttySYNTEVEN 462
Unpromoted resin to improve the flexibility in UP systems.
Solids content %
65,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
8 - 15Iodine colour value
≤ 3 IodineApplication methods
Knifing PuttySYNTEVEN 474
Fast cold-curing resin, even at low temperatures, has been developped in order to have a very fast sandability after the application. Medium flexibility. Very high reactivity.
Solids content %
62,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 15 IodineApplication methods
Knifing PuttySYNTEVEN 610
Direct glossy unsaturated polyester resin used to formulate conventional curing coatings (wax-free) clear or pigmented for wood.
Solids content %
75 ± 1Solvent(s)
StyreneBrookfield Viscosity at 25°C - mPas
2400 - 2700Acid value on solids - mg KOH/g
15 - 25Iodine colour value
≤ 2 IodineDesigned for
WoodNote
Sanding sealerSYNTEVEN 614
General purpose Low shrinkage. Semi rigid.
Solids content %
73,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
15 - 20Iodine colour value
≤ 15 IodineDesigned for
MarbleNote
Chemical AnchoringSYNTEVEN 643
DCPD-modified unsaturated polyester resin in methacrylic monomer for redox and UV system.
Solids content %
65 ± 1Solvent(s)
Peg 200 DMABrookfield Viscosity at 25°C - mPas
2000 - 2500Acid value on solids - mg KOH/g
10 - 20Note
Styrene free and ElettroinsulationSYNTEVEN 674
Fast cold-curing resin, even at low temperatures. Excellent flexibility and adhesion with high reactivity and high stability properties. Very fast sanding time.
Solids content %
63 ± 15Solvent(s)
StyreneAcid value on solids - mg KOH/g
15 - 25Iodine colour value
≤ 30 IodineApplication methods
Knifing PuttySYNTEVEN 701
To formulate clear and pigmented, coatings for wood and furniture and spray filler for automotive refinishing. High gloss, good reactivity and hardness. Rigid.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
12 - 18Iodine colour value
≤ 100 AphaApplication methods
Spraing PuttySYNTEVEN 702
To formulate spray filler for automotive refinishing. High gloss, low viscosity, good reactivity and hardness. Rigid.
Solids content %
69 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
12 - 20Iodine colour value
≤100 AphaApplication methods
Spraing PuttySYNTEVEN 703
Conventional curing, for primer and top-coat. Good flow and hardness, easy to sand.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
≤ 29Iodine colour value
Max 2 IodineSYNTEVEN 704
For clear and pigmented top coat non yellowing redox system.
Solids content %
80 ± 1Solvent(s)
Butyl AcetateAcid value on solids - mg KOH/g
14 - 22Iodine colour value
≤ 100 AphaNote
Styrene freeSYNTEVEN 713
For top-coat redox system. Monomer free.
Solids content %
100Solvent(s)
Solvent freeAcid value on solids - mg KOH/g
Ca 22Iodine colour value
Max 2 IodineNote
Styrene freeSYNTEVEN 714
Conventional curing, for primer and top-coat. Good flow and hardness, more reactive than Synteven 703.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
≤ 20Iodine colour value
≤ 130 AphaSYNTEVEN 720
For top- coat redox and UV system, with a very good flexibility.
Solids content %
70 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
15 - 20Iodine colour value
≤ 150 AphaDesigned for
WoodApplication methods
Spraing PuttySYNTEVEN 722
Conventional curing, for primer and top-coat. Good flow and hardness, more reactive than Synteven 714.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
14 - 20Iodine colour value
≤ 130 AphaSYNTEVEN 725
Special grade for wax primer redox and UV system. Fast reactivity and hardness.
Solids content %
68 ± 1Solvent(s)
StyreneBrookfield Viscosity at 25°C - mPas
1400 - 1600Acid value on solids - mg KOH/g
≤ 30Iodine colour value
≤ 150 AphaSYNTEVEN 728AE
For clear and pigmented top coat non yellowing redox and UV system, good flexibility and high gloss.
Solids content %
80 ± 1Solvent(s)
Ethyl AcetateBrookfield Viscosity at 25°C - mPas
1700 - 2000Acid value on solids - mg KOH/g
≤ 20Iodine colour value
≤ 150 AphaNote
Styrene freeSYNTEVEN 729AE
For top-coat redox and UV system. Very fast curing.
Solids content %
80 ± 1Solvent(s)
Ethyl AcetateBrookfield Viscosity at 25°C - mPas
4000 - 5000Acid value on solids - mg KOH/g
≤ 20Iodine colour value
≤ 150 AphaNote
Styrene freeSYNTEVEN G 650 / 75 HPMA
Highly reactive diret gloss polyester for UV and REDOX systems, styrene-free.
Solids content %
75 ± 1Solvent(s)
HPMAAcid value on solids - mg KOH/g
12 - 22Iodine colour value
Max 2 IodineDesigned for
WoodNote
Styrene freeSYNTEVEN P 3 GA - 707
Fast curing and good hardness also for clear or pigmented top coat redox and UV system.
Solids content %
68 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
14 - 20Iodine colour value
Max 1 IodineSYNTEVEN PL 604
For top-coat redox and UV system. Very fast and high compatibility in styrene.
Solids content %
69,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 100 AphaSYNTEVEN PS 07 - 731
Special grade for wax primer redox and UV system. Fast reactivity and hardness.
Solids content %
68 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
25 - 32Iodine colour value
Max 1 IodineSYNTEVEN PS 46 GA/AC
For top-coat redox and UV system. Very fast curing.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
16 - 22Iodine colour value
Max 2 IodineSYNTEVEN UL 959 GA - 700
For high gloss top-coat with "wet look" effect. Reactive and hard polymer.
Solids content %
75 ± 1Solvent(s)
StyreneBrookfield Viscosity at 25°C - mPas
1200 - 1600Acid value on solids - mg KOH/g
15 - 21Iodine colour value
≤ 150 AphaSYNTEVEN UL 966 GA - 626
For UV system. Direct gloss, for very fast sanding sealer.