AMINOL SUPER H
Is reccomanded to boost the cure speed in polyurethane coatings. Side effect is reduced pot life.
Type
Additive% of use
0,1 - 0,3Effect
Curing enhancerDesigned for
Polyurethane 2K SystemsApplication methods
SprayMITTEL 6703
Multipurpose additive used to prevent the formation of air bubbles.
Type
Additive% of use
0,4 - 1,5Effect
Anti bubbleDesigned for
Polyurethane Top and BasecoatsApplication methods
Spray - CurtainMITTEL 6713
Generates a synergistic reaction when blended with Mittel 6703.
Type
Additive% of use
0,4 - 1,0Effect
Anti bubble / LevellingDesigned for
Polyurethane TopcoatsApplication methods
Spray - CurtainMITTEL 6732
Blended with Mittel 6737 to improve the hardness of matt finish coatings for curtain coating application.
Type
Additive% of use
0,3 - 1,5Effect
Improve surface hardnessDesigned for
Matt Finish PolyurethaneApplication methods
CurtainMITTEL 6737
Excellent performance in bubble prevention and flow control. The product may be overcoated without sanding.
Type
Additive% of use
0,5 - 2,0Effect
Levelling / SlipDesigned for
Polyurethane TopcoatsApplication methods
Spray - CurtainMITTEL 6745
Anti-cratering effect and flow properties enhancer. Mainly used in unsaturated polyester based coatingas.
Type
Additive% of use
0,5 - 1,0Effect
Anti pinholing / Anti crateringDesigned for
Direct gloss PolyesterApplication methods
SprayMITTEL 6755
Excellent enhancer of the appearance of polyurethane coatings. Ensure the additive is throughly dispersed.
Type
Additive% of use
0,4 - 0,8Effect
Anti - bubble / Hardening Anti-gassing / Flow control / Solvent releaseDesigned for
Polyurethane TopcoatsApplication methods
CurtainMITTEL 6763
High efficiency in removing foam from polyester basecoats containing zinc stearate.
Type
Additive% of use
0,5 - 2,0Effect
Anti bubbleDesigned for
UV Curables Thixotropic PolyesterApplication methods
Spray - Curtain - RollerMITTEL 6772
Is reccomanded to boost the cure speed in polyurethane coatings.
Type
Additive% of use
0,05 - 2,0Effect
Curing enhancerDesigned for
Polyurethane 2K SystemsApplication methods
SprayMITTEL 6818
Specifically designed for high solid and low VOC PU coatings.
Type
Additive% of use
1 - 4Effect
Defoamer / LevellingDesigned for
PU and Air drying enamelsApplication methods
Spray - Roller - BrushMITTEL 6821
Organo metallic accelerator which does not significantly alter the pot-life of polyurethanes systems.