Only registered users can download the product Data Sheets (in product pages or products lists). Please login or register to access this informations. If you need the Security Sheets please contact us.
ITALESTER 203
Oil free polyester, flexible and reactive, designed for can-coatings with good sterilization properties.
Solids content %
60 ± 2Solvent(s)
SN 150 - ButilglycolBrookfield Viscosity at 25°C - mPas
3000 - 5000Acid value on solids - mg KOH/g
2 - 7% OH on solids
2 ± 0,2Max colour - Gardner scale
2ITALESTER 205 SND
Polyester resin for can coatings, high flexible, specific for all kinds of metal sustrates. High sterilization resistance.
Solids content %
60 ± 2Solvent(s)
SN 150 NDBrookfield Viscosity at 25°C - mPas
8000 - 15000Acid value on solids - mg KOH/g
5 - 10% OH on solids
1,7 ± 0,2Max colour - Gardner scale
ITALESTER 218 SND
Can-coatings either sealers and OPV. It has an excellent balance between the chemical resistances and the mechanical properties.
Solids content %
50 ± 1Solvent(s)
SN 150 / DPGMEBrookfield Viscosity at 25°C - mPas
1500 - 2200Acid value on solids - mg KOH/g
3 Max% OH on solids
0,7 ± 0,2Max colour - Gardner scale
3Note
Basecoat / PrimerITALESTER 226
Isophtalic polyester resin specific for coil-coatings and stoving enamels. Oustanding chemical resistance and hardness. Good flexibility and high coverage.
Solids content %
69 ± 2Solvent(s)
SN 150 / ButilglycolBrookfield Viscosity at 25°C - mPas
2500 - 4500Acid value on solids - mg KOH/g
7 - 15% OH on solids
1,6 ± 0,2Max colour - Gardner scale
2Note
Top coatITALESTER 229
Oil free polyester, slightly ramified with high solid content for coil-coatings top-coat.
Solids content %
70 ± 2Solvent(s)
SN 100 / ButilglycolBrookfield Viscosity at 25°C - mPas
2000 - 4000Acid value on solids - mg KOH/g
10 Max% OH on solids
1,5 ± 0,2Max colour - Gardner scale
1Note
Top coatITALESTER 242
Polyester resin for collapsable tubes or where high drawing is requested.
Solids content %
62 ± 2Solvent(s)
SN 150 NDBrookfield Viscosity at 25°C - mPas
14000 - 18000Acid value on solids - mg KOH/g
0 - 10% OH on solids
1,8 ± 0,2Max colour - Gardner scale
1Note
High flexibilityITALESTER 251
Oil-free saturated polyester, complies with FDA § 175.300 without restriction for alcoholic foods, used for interior can coatings.
Solids content %
60 ± 2Solvent(s)
Naphtha Solvent 150 ND / Dipropylene glycol monomethyl etherBrookfield Viscosity at 25°C - mPas
15000 - 22000Acid value on solids - mg KOH/g
10 - 20% OH on solids
1,8 ± 0,3Max colour - Gardner scale
Note
Interior can - FDA approuvedITALESTER 300
Isophtalic polyester resin specific for coil-coatings and stoving enamels. High oustanding chemical resistance and hardness. Good flexibility and high coverage.
Solids content %
59 ± 2Solvent(s)
SN 150 / ButilglycolBrookfield Viscosity at 25°C - mPas
2500 - 3500Acid value on solids - mg KOH/g
5 - 12% OH on solids
2,7 ± 0,2Max colour - Gardner scale
2ITALESTER H 27
Isophtalic polyester suggested for water soluble primer and top-coats for packaging and stoving systems. Highly performing in hardness and reactivity with good flexibility.
Solids content %
75 ± 2Solvent(s)
ButylglicolBrookfield Viscosity at 25°C - mPas
8000 - 15000Acid value on solids - mg KOH/g
45 - 55% OH on solids
3,5 ± 0,2Max colour - Gardner scale
1Note
Water based systemITALESTER H 28
Oil-free polyester suitable for water-borne stoving enamels in combination wit amino resins.
Solids content %
75 ± 2Solvent(s)
DipropylenGlycol MethylEther (PM2)Brookfield Viscosity at 25°C - mPas
8000 - 20000Acid value on solids - mg KOH/g
45 - 55% OH on solids
3,4 ± 0,2Max colour - Gardner scale
2Note
Water based systemITAMIN BG 140
Benzoguanamine/formaldehyde resin. High solid, high reactivity, with good compatibility and long shelf-life.
Type
BFSolids content %
80 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
5000 - 10000Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,4Max colour - Gardner scale
Note
High solidITAMIN BG 141
Benzoguanamine/formaldehyde resin. High gloss and good compatibility. Excellent pigments wettability, good adhesion. Good flexibility. High chemical resistance.
Type
BFSolids content %
68 ± 2Solvent(s)
Butanol / Xylene (1/1)Brookfield Viscosity at 25°C - mPas
200 - 350Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,3Max colour - Gardner scale
ITAMIN BG 141 AF
Version aromatic free of Itamin BG 141.
Type
BFSolids content %
72 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
400 - 800Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,3Max colour - Gardner scale
≤ 1Note
Aromatic freeITAMIN BG 142
Higher flexybility than Itamin BG 141.
Type
BFSolids content %
70 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
450 - 750Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,7Max colour - Gardner scale
ITAMIN HM3 / LF
Fully metylated "HMMM" resin for solvent and water based system. Very low free formaldehyde.
Type
HMMMSolids content %
98 minBrookfield Viscosity at 25°C - mPas
3000 - 6000Max free formaldehyde %
Max colour - Gardner scale
ITAMIN M 174
Medium-high reactivity butilated melamine resin for stoving enamels (100 - 120 °C) with high solid contents. High compatibility and flexibility.
Solids content %
75 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
6000 - 9000Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,8Max colour - Gardner scale
≤ 1ITAMIN M 177
Medium-high reactivity butilated melamine resin with high gloss, good flowing and chemical resistance. Low free formaldehyde.
Type
MFSolids content %
72 ± 1Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
2000 - 3000Acid value on solids - mg KOH/g
Max free formaldehyde %
≤ 0,4Max colour - Gardner scale
ITAMIN M 183
Medium-high reactivity butilated melamine resin designed for O.E.M stoving enamelsand varnishes; high solid formulations and high gloss surface.
Type
MFSolids content %
70 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
600 - 900Acid value on solids - mg KOH/g
0,3Max free formaldehyde %
≤ 0,5Max colour - Gardner scale
ITAMIN M 188
High reactivity butilated melamine resin for O.E.M with very good flow and mechanical properties. Low free formaldehyde.
Type
MFSolids content %
70 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
800 - 2000Acid value on solids - mg KOH/g
1Max free formaldehyde %
≤ 0,3Max colour - Gardner scale
≤ 1ITAMIN PM3
Partially metylated melamine resin, high reactivity for low temperature stoving enamels.
Type
MFSolids content %
76 ± 2Solvent(s)
IsobutanolBrookfield Viscosity at 25°C - mPas
3200 - 5500Max free formaldehyde %
≤ 0,8Max colour - Gardner scale
ITAMIN U 38
Urea/Formaldeheide resin to be used in combination with high equivalent epoxy resins with very high reactivity.
Type
UFSolids content %
62 ± 2Solvent(s)
Isobutanol / Xylene (3/1)Brookfield Viscosity at 25°C - mPas
800 - 2000Acid value on solids - mg KOH/g
5Max free formaldehyde %
1Max colour - Gardner scale
SINTAL F 184 / 70 X
Non-yellowing alkyd resin, suitable for high quality NC, AC, PU and stoving coatings. Top coats for furniture, car refinishing, general industry and OPV cans.
Solids content %
70 ± 2Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
5000 - 8000Acid value on solids - mg KOH/g
6 - 12% OH on solids
2,8 ± 0,2Max colour - Gardner scale
2Oil length %
28Oil - fatty acids
CoconutNote
MultipurposeSINTAL GS 84
Non yellowing short oil alkyd resin, suitable for 2K-PU coatings, for car and industrial refinishing OPV cans and for wood applications.
Solids content %
70 ± 2Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
4500 - 6500Acid value on solids - mg KOH/g
5 - 10% OH on solids
3Max colour - Gardner scale
50 aphaOil length %
28Oil - fatty acids
Sinthetic fatty acidNote
Compatible with acrylicsSINTAL MR 953 / 80 PM
Particuraly suggested for primer and top-coat for general line, clear and pigmented. Good flow and mechanical properties.
Solids content %
80 ± 1Solvent(s)
MethoxypropanolBrookfield Viscosity at 25°C - mPas
3500 - 7500Acid value on solids - mg KOH/g
10 Max% OH on solids
-Max colour - Gardner scale
5 MaxOil length %
61Oil - fatty acids
Castor oilNote
General lineURONAL BN 75
Blocked isocyanate for sealers and OPV for metal, in combination with hydroxylated polyesters or acrylics resins.