ITALESTER 203
Oil free polyester, flexible and reactive, designed for can-coatings with good sterilization properties.
Solids content %
60 ± 2Solvent(s)
SN 150 - ButilglycolBrookfield Viscosity at 25°C - mPas
3000 - 5000Acid value on solids - mg KOH/g
2 - 7% OH on solids
2 ± 0,2Max colour - Gardner scale
2ITALESTER 205 SND
Polyester resin for can coatings, high flexible, specific for all kinds of metal sustrates. High sterilization resistance.
Solids content %
60 ± 2Solvent(s)
SN 150 NDBrookfield Viscosity at 25°C - mPas
8000 - 15000Acid value on solids - mg KOH/g
5 - 10% OH on solids
1,7 ± 0,2Max colour - Gardner scale
ITALESTER 218 SND
Can-coatings either sealers and OPV. It has an excellent balance between the chemical resistances and the mechanical properties.
Solids content %
50 ± 1Solvent(s)
SN 150 / DPGMEBrookfield Viscosity at 25°C - mPas
1500 - 2200Acid value on solids - mg KOH/g
3 Max% OH on solids
0,7 ± 0,2Max colour - Gardner scale
3Note
Basecoat / PrimerITALESTER 226
Isophtalic polyester resin specific for coil-coatings and stoving enamels. Oustanding chemical resistance and hardness. Good flexibility and high coverage.
Solids content %
69 ± 2Solvent(s)
SN 150 / ButilglycolBrookfield Viscosity at 25°C - mPas
2500 - 4500Acid value on solids - mg KOH/g
7 - 15% OH on solids
1,6 ± 0,2Max colour - Gardner scale
2Note
Top coatITALESTER 229
Oil free polyester, slightly ramified with high solid content for coil-coatings top-coat.
Solids content %
70 ± 2Solvent(s)
SN 100 / ButilglycolBrookfield Viscosity at 25°C - mPas
2000 - 4000Acid value on solids - mg KOH/g
10 Max% OH on solids
1,5 ± 0,2Max colour - Gardner scale
1Note
Top coatITALESTER 242
Polyester resin for collapsable tubes or where high drawing is requested.
Solids content %
62 ± 2Solvent(s)
SN 150 NDBrookfield Viscosity at 25°C - mPas
14000 - 18000Acid value on solids - mg KOH/g
0 - 10% OH on solids
1,8 ± 0,2Max colour - Gardner scale
1Note
High flexibilityITALESTER 251
Oil-free saturated polyester, complies with FDA § 175.300 without restriction for alcoholic foods, used for interior can coatings.
Solids content %
60 ± 2Solvent(s)
Naphtha Solvent 150 ND / Dipropylene glycol monomethyl etherBrookfield Viscosity at 25°C - mPas
15000 - 22000Acid value on solids - mg KOH/g
10 - 20% OH on solids
1,8 ± 0,3Max colour - Gardner scale
Note
Interior can - FDA approuvedITALESTER 300
Isophtalic polyester resin specific for coil-coatings and stoving enamels. High oustanding chemical resistance and hardness. Good flexibility and high coverage.
Solids content %
59 ± 2Solvent(s)
SN 150 / ButilglycolBrookfield Viscosity at 25°C - mPas
2500 - 3500Acid value on solids - mg KOH/g
5 - 12% OH on solids
2,7 ± 0,2Max colour - Gardner scale
2ITALESTER H 27
Isophtalic polyester suggested for water soluble primer and top-coats for packaging and stoving systems. Highly performing in hardness and reactivity with good flexibility.
Solids content %
75 ± 2Solvent(s)
ButylglicolBrookfield Viscosity at 25°C - mPas
8000 - 15000Acid value on solids - mg KOH/g
45 - 55% OH on solids
3,5 ± 0,2Max colour - Gardner scale
1Note
Water based systemITALESTER H 28
Oil-free polyester suitable for water-borne stoving enamels in combination wit amino resins.
Solids content %
75 ± 2Solvent(s)
DipropylenGlycol MethylEther (PM2)Brookfield Viscosity at 25°C - mPas
8000 - 20000Acid value on solids - mg KOH/g
45 - 55% OH on solids
3,4 ± 0,2Max colour - Gardner scale
2Note
Water based systemITAMIN BG 140
Benzoguanamine/formaldehyde resin. High solid, high reactivity, with good compatibility and long shelf-life.
Type
BFSolids content %
80 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
5000 - 10000Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,4Max colour - Gardner scale
Note
High solidITAMIN BG 141
Benzoguanamine/formaldehyde resin. High gloss and good compatibility. Excellent pigments wettability, good adhesion. Good flexibility. High chemical resistance.
Type
BFSolids content %
68 ± 2Solvent(s)
Butanol / Xylene (1/1)Brookfield Viscosity at 25°C - mPas
200 - 350Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,3Max colour - Gardner scale
ITAMIN BG 141 AF
Version aromatic free of Itamin BG 141.
Type
BFSolids content %
72 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
400 - 800Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,3Max colour - Gardner scale
≤ 1Note
Aromatic freeITAMIN BG 142
Higher flexybility than Itamin BG 141.
Type
BFSolids content %
70 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
450 - 750Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,7Max colour - Gardner scale
ITAMIN HM3 / LF
Fully metylated "HMMM" resin for solvent and water based system. Very low free formaldehyde.
Type
HMMMSolids content %
98 minBrookfield Viscosity at 25°C - mPas
3000 - 6000Max free formaldehyde %
Max colour - Gardner scale
ITAMIN M 174
Medium-high reactivity butilated melamine resin for stoving enamels (100 - 120 °C) with high solid contents. High compatibility and flexibility.
Solids content %
75 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
6000 - 9000Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,8Max colour - Gardner scale
≤ 1ITAMIN M 177
Medium-high reactivity butilated melamine resin with high gloss, good flowing and chemical resistance. Low free formaldehyde.
Type
MFSolids content %
72 ± 1Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
2000 - 3000Acid value on solids - mg KOH/g
Max free formaldehyde %
≤ 0,4Max colour - Gardner scale
ITAMIN M 183
Medium-high reactivity butilated melamine resin designed for O.E.M stoving enamelsand varnishes; high solid formulations and high gloss surface.
Type
MFSolids content %
70 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
600 - 900Acid value on solids - mg KOH/g
0,3Max free formaldehyde %
≤ 0,5Max colour - Gardner scale
ITAMIN M 188
High reactivity butilated melamine resin for O.E.M with very good flow and mechanical properties. Low free formaldehyde.
Type
MFSolids content %
70 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
800 - 2000Acid value on solids - mg KOH/g
1Max free formaldehyde %
≤ 0,3Max colour - Gardner scale
≤ 1ITAMIN PM3
Partially metylated melamine resin, high reactivity for low temperature stoving enamels.
Type
MFSolids content %
76 ± 2Solvent(s)
IsobutanolBrookfield Viscosity at 25°C - mPas
3200 - 5500Max free formaldehyde %
≤ 0,8Max colour - Gardner scale
ITAMIN U 38
Urea/Formaldeheide resin to be used in combination with high equivalent epoxy resins with very high reactivity.
Type
UFSolids content %
62 ± 2Solvent(s)
Isobutanol / Xylene (3/1)Brookfield Viscosity at 25°C - mPas
800 - 2000Acid value on solids - mg KOH/g
5Max free formaldehyde %
1Max colour - Gardner scale
SINTAL F 184 / 70 X
Non-yellowing alkyd resin, suitable for high quality NC, AC, PU and stoving coatings. Top coats for furniture, car refinishing, general industry and OPV cans.
Solids content %
70 ± 2Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
5000 - 8000Acid value on solids - mg KOH/g
6 - 12% OH on solids
2,8 ± 0,2Max colour - Gardner scale
2Oil length %
28Oil - fatty acids
CoconutNote
MultipurposeSINTAL GS 84
Non yellowing short oil alkyd resin, suitable for 2K-PU coatings, for car and industrial refinishing OPV cans and for wood applications.
Solids content %
70 ± 2Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
4500 - 6500Acid value on solids - mg KOH/g
5 - 10% OH on solids
3Max colour - Gardner scale
50 aphaOil length %
28Oil - fatty acids
Sinthetic fatty acidNote
Compatible with acrylicsSINTAL MR 953 / 80 PM
Particuraly suggested for primer and top-coat for general line, clear and pigmented. Good flow and mechanical properties.
Solids content %
80 ± 1Solvent(s)
MethoxypropanolBrookfield Viscosity at 25°C - mPas
3500 - 7500Acid value on solids - mg KOH/g
10 Max% OH on solids
-Max colour - Gardner scale
5 MaxOil length %
61Oil - fatty acids
Castor oilNote
General lineURONAL BN 75
Blocked isocyanate for sealers and OPV for metal, in combination with hydroxylated polyesters or acrylics resins.