Only registered users can download the product Data Sheets (in product pages or products lists). Please login or register to access this informations. If you need the Security Sheets please contact us.

ITALESTER 203

Oil free polyester, flexible and reactive, designed for can-coatings with good sterilization properties.

Solids content %

60 ± 2

Solvent(s)

SN 150 - Butilglycol

Brookfield Viscosity at 25°C - mPas

3000 - 5000

Acid value on solids - mg KOH/g

2 - 7

% OH on solids

2 ± 0,2

Max colour - Gardner scale

2

ITALESTER 205 SND

Polyester resin for can coatings, high flexible, specific for all kinds of metal sustrates. High sterilization resistance.

Solids content %

60 ± 2

Solvent(s)

SN 150 ND

Brookfield Viscosity at 25°C - mPas

8000 - 15000

Acid value on solids - mg KOH/g

5 - 10

% OH on solids

1,7 ± 0,2

Max colour - Gardner scale

ITALESTER 218 SND

Can-coatings either sealers and OPV. It has an excellent balance between the chemical resistances and the mechanical properties.

Solids content %

50 ± 1

Solvent(s)

SN 150 / DPGME

Brookfield Viscosity at 25°C - mPas

1500 - 2200

Acid value on solids - mg KOH/g

3 Max

% OH on solids

0,7 ± 0,2

Max colour - Gardner scale

3

Note

Basecoat / Primer

ITALESTER 226

Isophtalic polyester resin specific for coil-coatings and stoving enamels. Oustanding chemical resistance and hardness. Good flexibility and high coverage.

Solids content %

69 ± 2

Solvent(s)

SN 150 / Butilglycol

Brookfield Viscosity at 25°C - mPas

2500 - 4500

Acid value on solids - mg KOH/g

7 - 15

% OH on solids

1,6 ± 0,2

Max colour - Gardner scale

2

Note

Top coat

ITALESTER 229

Oil free polyester, slightly ramified with high solid content for coil-coatings top-coat.

Solids content %

70 ± 2

Solvent(s)

SN 100 / Butilglycol

Brookfield Viscosity at 25°C - mPas

2000 - 4000

Acid value on solids - mg KOH/g

10 Max

% OH on solids

1,5 ± 0,2

Max colour - Gardner scale

1

Note

Top coat

ITALESTER 242

Polyester resin for collapsable tubes or where high drawing is requested.

Solids content %

62 ± 2

Solvent(s)

SN 150 ND

Brookfield Viscosity at 25°C - mPas

14000 - 18000

Acid value on solids - mg KOH/g

0 - 10

% OH on solids

1,8 ± 0,2

Max colour - Gardner scale

1

Note

High flexibility

ITALESTER 251

Oil-free saturated polyester, complies with FDA § 175.300 without restriction for alcoholic foods, used for interior can coatings.

Solids content %

60 ± 2

Solvent(s)

Naphtha Solvent 150 ND / Dipropylene glycol monomethyl ether

Brookfield Viscosity at 25°C - mPas

15000 - 22000

Acid value on solids - mg KOH/g

10 - 20

% OH on solids

1,8 ± 0,3

Max colour - Gardner scale

Note

Interior can - FDA approuved

ITALESTER 300

Isophtalic polyester resin specific for coil-coatings and stoving enamels. High oustanding chemical resistance and hardness. Good flexibility and high coverage.

Solids content %

59 ± 2

Solvent(s)

SN 150 / Butilglycol

Brookfield Viscosity at 25°C - mPas

2500 - 3500

Acid value on solids - mg KOH/g

5 - 12

% OH on solids

2,7 ± 0,2

Max colour - Gardner scale

2

ITALESTER H 27

Isophtalic polyester suggested for water soluble primer and top-coats for packaging and stoving systems. Highly performing in hardness and reactivity with good flexibility.

Solids content %

75 ± 2

Solvent(s)

Butylglicol

Brookfield Viscosity at 25°C - mPas

8000 - 15000

Acid value on solids - mg KOH/g

45 - 55

% OH on solids

3,5 ± 0,2

Max colour - Gardner scale

1

Note

Water based system

ITALESTER H 28

Oil-free polyester suitable for water-borne stoving enamels in combination wit amino resins.

Solids content %

75 ± 2

Solvent(s)

DipropylenGlycol MethylEther (PM2)

Brookfield Viscosity at 25°C - mPas

8000 - 20000

Acid value on solids - mg KOH/g

45 - 55

% OH on solids

3,4 ± 0,2

Max colour - Gardner scale

2

Note

Water based system

ITAMIN BG 140

Benzoguanamine/formaldehyde resin. High solid, high reactivity, with good compatibility and long shelf-life.

Type

BF

Solids content %

80 ± 2

Solvent(s)

Butanol

Brookfield Viscosity at 25°C - mPas

5000 - 10000

Acid value on solids - mg KOH/g

2

Max free formaldehyde %

≤ 0,4

Max colour - Gardner scale

Note

High solid

ITAMIN BG 141

Benzoguanamine/formaldehyde resin. High gloss and good compatibility. Excellent pigments wettability, good adhesion. Good flexibility. High chemical resistance.

Type

BF

Solids content %

68 ± 2

Solvent(s)

Butanol / Xylene (1/1)

Brookfield Viscosity at 25°C - mPas

200 - 350

Acid value on solids - mg KOH/g

2

Max free formaldehyde %

≤ 0,3

Max colour - Gardner scale

ITAMIN BG 141 AF

Version aromatic free of Itamin BG 141.

Type

BF

Solids content %

72 ± 2

Solvent(s)

Butanol

Brookfield Viscosity at 25°C - mPas

400 - 800

Acid value on solids - mg KOH/g

2

Max free formaldehyde %

≤ 0,3

Max colour - Gardner scale

≤ 1

Note

Aromatic free

ITAMIN BG 142

Higher flexybility than Itamin BG 141.

Type

BF

Solids content %

70 ± 2

Solvent(s)

Butanol

Brookfield Viscosity at 25°C - mPas

450 - 750

Acid value on solids - mg KOH/g

2

Max free formaldehyde %

≤ 0,7

Max colour - Gardner scale

ITAMIN HM3 / LF

Fully metylated  "HMMM" resin for solvent and water based system. Very low free formaldehyde.

Type

HMMM

Solids content %

98 min

Brookfield Viscosity at 25°C - mPas

3000 - 6000

Max free formaldehyde %

Max colour - Gardner scale

ITAMIN M 174

Medium-high reactivity butilated melamine resin for stoving enamels (100 - 120 °C) with high solid contents. High compatibility and flexibility.

Solids content %

75 ± 2

Solvent(s)

Butanol

Brookfield Viscosity at 25°C - mPas

6000 - 9000

Acid value on solids - mg KOH/g

2

Max free formaldehyde %

≤ 0,8

Max colour - Gardner scale

≤ 1

ITAMIN M 177

Medium-high reactivity butilated melamine resin with high gloss, good flowing and chemical resistance. Low free formaldehyde.

Type

MF

Solids content %

72 ± 1

Solvent(s)

Butanol

Brookfield Viscosity at 25°C - mPas

2000 - 3000

Acid value on solids - mg KOH/g

Max free formaldehyde %

≤ 0,4

Max colour - Gardner scale

ITAMIN M 183

Medium-high reactivity butilated melamine resin designed for O.E.M stoving enamelsand varnishes; high solid formulations and high gloss surface.

Type

MF

Solids content %

70 ± 2

Solvent(s)

Butanol

Brookfield Viscosity at 25°C - mPas

600 - 900

Acid value on solids - mg KOH/g

0,3

Max free formaldehyde %

≤ 0,5

Max colour - Gardner scale

ITAMIN M 188

High reactivity butilated melamine resin for O.E.M with very good flow and mechanical properties.  Low free formaldehyde.

Type

MF

Solids content %

70 ± 2

Solvent(s)

Butanol

Brookfield Viscosity at 25°C - mPas

800 - 2000

Acid value on solids - mg KOH/g

1

Max free formaldehyde %

≤ 0,3

Max colour - Gardner scale

≤ 1

ITAMIN PM3

Partially metylated melamine resin, high reactivity for low temperature stoving enamels.

Type

MF

Solids content %

76 ± 2

Solvent(s)

Isobutanol

Brookfield Viscosity at 25°C - mPas

3200 - 5500

Max free formaldehyde %

≤ 0,8

Max colour - Gardner scale

ITAMIN U 38

Urea/Formaldeheide resin to be used in combination with high equivalent epoxy resins with very high reactivity.

Type

UF

Solids content %

62 ± 2

Solvent(s)

Isobutanol / Xylene (3/1)

Brookfield Viscosity at 25°C - mPas

800 - 2000

Acid value on solids - mg KOH/g

5

Max free formaldehyde %

1

Max colour - Gardner scale

SINTAL F 184 / 70 X

Non-yellowing alkyd resin, suitable for high quality NC, AC, PU and stoving coatings. Top coats for furniture, car refinishing, general industry and OPV cans.

Solids content %

70 ± 2

Solvent(s)

Xylene

Brookfield Viscosity at 25°C - mPas

5000 - 8000

Acid value on solids - mg KOH/g

6 - 12

% OH on solids

2,8 ± 0,2

Max colour - Gardner scale

2

Oil length %

28

Oil - fatty acids

Coconut

Note

Multipurpose

SINTAL GS 84

Non yellowing short oil alkyd resin, suitable for 2K-PU coatings, for car and industrial refinishing OPV cans and for wood applications.

Solids content %

70 ± 2

Solvent(s)

Xylene

Brookfield Viscosity at 25°C - mPas

4500 - 6500

Acid value on solids - mg KOH/g

5 - 10

% OH on solids

3

Max colour - Gardner scale

50 apha

Oil length %

28

Oil - fatty acids

Sinthetic fatty acid

Note

Compatible with acrylics

SINTAL MR 953 / 80 PM

Particuraly suggested for primer and top-coat for general line, clear and pigmented. Good flow and mechanical properties.

Solids content %

80 ± 1

Solvent(s)

Methoxypropanol

Brookfield Viscosity at 25°C - mPas

3500 - 7500

Acid value on solids - mg KOH/g

10 Max

% OH on solids

-

Max colour - Gardner scale

5 Max

Oil length %

61

Oil - fatty acids

Castor oil

Note

General line

URONAL BN 75

Blocked isocyanate for sealers and OPV for metal, in combination with hydroxylated polyesters or acrylics resins.

Chemical Nature

Aliphatic

Solids content %

75

Solvent(s)

SN 100

% NCO

11,1

Brookfield Viscosity at 25°C - mPas

2500 - 4000

Max colour - Gardner scale

Note

Blocked

Select Language

Login Form

Go to the documentation

Richiedi documentazione