FTALON 1680 / 70 ABT
Weather resistant resin for polyurethane enamels with fast drying speed and high gloss level. High resistance to the thermal shocks.
Solids content %
70 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
2000 - 4500Acid value on solids - mg KOH/g
10 - 20% OH on solids
3,4 ± 0,2Max colour - Gardner scale
3FTALON 269 / 60 X
Two-pack polyurethane topcoats for metal, with very good out-door durability, high gloss and colour retention. High compatibility with tintometer paste systems.
Solids content %
60 ± 2Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
2000 - 4000Acid value on solids - mg KOH/g
9 - 15% OH on solids
3,7 ± 0,2Max colour - Gardner scale
3FTALON 60 / 60 X
Plasticising resin for two pack systems. Excellente wetting of pigments and substates.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
1700 - 2300Acid value on solids - mg KOH/g
11 - 16% OH on solids
4,5 ± 0,2Max colour - Gardner scale
4Note
High flexibilityFTALON TAC / 60 X
Top quality polyester for high solid varnish and enamels. Enabling to replace in formulation the hydroxylated acrylic resins with an excellent cost/performance balance.
Solids content %
60 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
2500 - 3100Acid value on solids - mg KOH/g
6 - 10% OH on solids
4,5 ± 0,2Max colour - Gardner scale
Note
Compatible with acrylicsFTALON TAC / 75 ABT
Top quality polyester for high solid varnish and enamels. Enabling to replace in formulation the hydroxylated acrylic resins with an excellent cost/performance balance.
Solids content %
75 ± 1Solvent(s)
Butyl AcetateBrookfield Viscosity at 25°C - mPas
5800 - 7200Acid value on solids - mg KOH/g
6 - 10% OH on solids
4,5 ± 0,2Max colour - Gardner scale
Note
Compatible with acrylicsFTALON TN / 65 X
Resin for pure polyurethane or blended acrylic/polyurethane enamels for wood and metal primer and topcoats. Represents a perfect balance between technical performance, costs and easy use. It can be used also for marine applications.
Solids content %
65 ± 1Solvent(s)
XyleneBrookfield Viscosity at 25°C - mPas
4500 - 5500Acid value on solids - mg KOH/g
20 - 27% OH on solids
4,7 ± 0,2Max colour - Gardner scale
3Note
Metal adhesionITALESTER 300
Isophtalic polyester resin specific for coil-coatings and stoving enamels. High oustanding chemical resistance and hardness. Good flexibility and high coverage.
Solids content %
59 ± 2Solvent(s)
SN 150 / ButilglycolBrookfield Viscosity at 25°C - mPas
2500 - 3500Acid value on solids - mg KOH/g
5 - 12% OH on solids
2,7 ± 0,2Max colour - Gardner scale
2ITAMIN M 170 P
High reactivity isobutilated melamine resin. Fast curing for low temperature stoving enamels (80 - 100°C), high gloss and good flexibility.
Solids content %
58 ± 2Solvent(s)
IsobutanolBrookfield Viscosity at 25°C - mPas
300 - 700Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,9Max colour - Gardner scale
≤ 1ITAMIN M 184
Medium-high reactivity butilated melamine resin for can coatings, OEM stoving enamels with high solid.
Type
MFSolids content %
78 ± 2Solvent(s)
ButanolBrookfield Viscosity at 25°C - mPas
5000 - 8000Acid value on solids - mg KOH/g
2Max free formaldehyde %
≤ 0,5Max colour - Gardner scale
MITTEL 6772
Is reccomanded to boost the cure speed in polyurethane coatings.
Type
Additive% of use
0,05 - 2,0Effect
Curing enhancerDesigned for
Polyurethane 2K SystemsApplication methods
SprayMITTEL 6821
Organo metallic accelerator which does not significantly alter the pot-life of polyurethanes systems.
Type
Additive% of use
0,2 - 2Effect
Curing enhancerDesigned for
Polyurethane systemsApplication methods
SpraySYNTEVEN 105
Pigmented pastes styrene free, general purpose.
Solids content %
100Solvent(s)
Solvent freeBrookfield Viscosity at 25°C - mPas
600 - 700Acid value on solids - mg KOH/g
18 - 22Note
For tinting paste, Styrene freeSYNTEVEN 107
Pigmented pastes styrene free,high pigment wettability.
Solids content %
100Solvent(s)
Solvent freeBrookfield Viscosity at 25°C - mPas
250 - 350Acid value on solids - mg KOH/g
15 - 25Colour
≤ 150 AphaNote
For tinting paste, Styrene freeSYNTEVEN 404
Ideal sole binder for wide range of fillers and putties. Very easy to sand, good adhesion properties and high stability. Medium flexbility.
Solids content %
62,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 15 IodineSYNTEVEN 430
Binder for adhesive, highly filled knifing fillers and putties for car, marble and stone. Fast curing, Very hard and easy to send. Rigid.
Solids content %
64 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
20 - 30Iodine colour value
≤ 15 IodineDesigned for
MarbleApplication methods
Knifing PuttySYNTEVEN 432
Highly filled knifing fillers and putties for car repair. Good adhesion properties to various kinds of substrates. Medium flexibility.
Solids content %
61 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
15 - 25Iodine colour value
≤ 10 IodineApplication methods
Knifing PuttySYNTEVEN 440
Ideal sole binder for wide range of fillers and putties. Very easy to sand, good adhesion properties and high stability. Medium flexbility.
Solids content %
62,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 15 IodineApplication methods
Knifing PuttySYNTEVEN 443
To improve the flexibility in UP systems. Medium reactivity, overbaking resistances to high temperature. High flexibility.
Solids content %
65 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
≤ 15Iodine colour value
≤ 15 IodineApplication methods
Knifing PuttySYNTEVEN 445
To improve the flexibility in UP systems. In combination with same other Synteven grade to improve the flexibility. High flexibility.
Solids content %
67 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 10 IodineApplication methods
Knifing PuttySYNTEVEN 447
To improve the flexibility in UP systems. Medium reactivity, overbaking resistances to high temperature. High flexibility.
Solids content %
65 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 10 IodineApplication methods
Knifing PuttySYNTEVEN 454
Special grade. Ideal sole binder for wide range of fillers and putties for light putty on galvanized steel.
Solids content %
64,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
≤ 20Application methods
Knifing PuttySYNTEVEN 462
Unpromoted resin to improve the flexibility in UP systems.
Solids content %
65,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
8 - 15Iodine colour value
≤ 3 IodineApplication methods
Knifing PuttySYNTEVEN 474
Fast cold-curing resin, even at low temperatures, has been developped in order to have a very fast sandability after the application. Medium flexibility. Very high reactivity.
Solids content %
62,5 ± 1,5Solvent(s)
StyreneAcid value on solids - mg KOH/g
5 - 15Iodine colour value
≤ 15 IodineApplication methods
Knifing PuttySYNTEVEN 674
Fast cold-curing resin, even at low temperatures. Excellent flexibility and adhesion with high reactivity and high stability properties. Very fast sanding time.
Solids content %
63 ± 15Solvent(s)
StyreneAcid value on solids - mg KOH/g
15 - 25Iodine colour value
≤ 30 IodineApplication methods
Knifing PuttySYNTEVEN 701
To formulate clear and pigmented, coatings for wood and furniture and spray filler for automotive refinishing. High gloss, good reactivity and hardness. Rigid.
Solids content %
75 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
12 - 18Iodine colour value
≤ 100 AphaApplication methods
Spraing PuttySYNTEVEN 702
To formulate spray filler for automotive refinishing. High gloss, low viscosity, good reactivity and hardness. Rigid.
Solids content %
69 ± 1Solvent(s)
StyreneAcid value on solids - mg KOH/g
12 - 20Iodine colour value
≤100 AphaApplication methods
Spraing PuttyURONAL KFL
Similar to KL, but more flexible, longer pot-life and more compatible with nitrocellulose.
Chemical Nature
Aliphatic AromaticSolids content %
60Solvent(s)
Butyl Acetate% NCO
10,0 - 10,6Brookfield Viscosity at 25°C - mPas
280 - 360Max colour - Gardner scale
URONAL KL / ABT
Mixed aliphatic/aromatic polymer for non yellowing fast drying polyurethane coatings.
Chemical Nature
Aliphatic AromaticSolids content %
60Solvent(s)
Butyl Acetate% NCO
10,2 - 10,8Brookfield Viscosity at 25°C - mPas
400 - 500Max colour - Gardner scale
URONAL NL
Aliphatic polyisocyanate for non yellowing polyurethane coatings, high gloss retention.
Chemical Nature
AliphaticSolids content %
75Solvent(s)
Xylene / PMA% NCO
16,0 - 17,0Brookfield Viscosity at 25°C - mPas
50 - 300Max colour - Gardner scale
Note
BiuretURONAL NL 100
Aliphatic polyisocyanate for non yellowing polyurethane coatings, high gloss retention. Solvent free.
Chemical Nature
AliphaticSolids content %
100% NCO
21,5 - 22,5Brookfield Viscosity at 25°C - mPas
2000 - 2800Max colour - Gardner scale
Note
TrimerURONAL NL 90
Aliphatic polyisocyanate for non yellowing polyurethane coatings, high gloss retention and high solid.
Chemical Nature
AliphaticSolids content %
90Solvent(s)
Butyl Acetate% NCO
19,1 - 20,5Brookfield Viscosity at 25°C - mPas
400 - 600Max colour - Gardner scale
Note
TrimerURONAL P 75 New Standard
Aromatic adduct for glossy polyurethane coatings or to use as plasticising partner of more brittle isocyanates.